Description
Brand new 45" x 82" replacement door for a walk-in cooler, prehung in its own frame and ready to install. Choose a retrofit plug frame or a jamb frame, your finish, and your hinge side above.
Rough opening
- Plug frame: 43" x 82"
- Jamb frame: 45" x 83". This leaves a 1" gap around the frame to fill with spray foam after the door is installed, which makes the frame sturdier.
Not sure which you have? See the measurement guide or call 313-528-7888 before you order.
Standard features
- Prehung in a plug frame or jamb frame
- 26-gauge stucco-embossed steel
- R32 rigid foam core, the same core we use in our freezer doors
- Chrome, NSF-approved heavy-duty hardware
- Cam-lift or spring-assisted hinges
- Lockable latch with inside safety release handle
- Magnetic door gasket and double-sweep gasket
- Door closer, so the door shuts fully when left ajar
- 16-gauge aluminum diamond plate kick plates, inside and outside, to protect against carts and hand trucks
Lead time and warranty
- Standard production time is about 5 weeks from order confirmation (an estimate, not a guarantee)
- Need it sooner? Choose Expedited (10 business days) or Rush (3 business days) production above
- Ships by freight, or pick up in Detroit
- 1-year workmanship warranty; hardware carries the manufacturer's warranty
Need this size for a freezer? See our walk-in freezer replacement doors, which add an anti-condensate heat wire.
Window specs
14" x 14" window
Non-heated view port window for walk-in cooler doors and walls. Genuine Component Hardware (Keil) W91 Series, 14" H x 14" W x 4" D in brushed aluminum.
- Insulated glass window for walk-in cooler applications
- Brushed aluminum frame, 4" (102 mm) deep for standard walk-in panels
- Lets staff check inside the walk-in without opening the door
- Direct OEM replacement, part # W91-14143-UGUF
14" x 24" window
Non-heated view port window for walk-in cooler doors and walls. Genuine Component Hardware (Keil) W91 Series, 24" H x 14" W x 4" D in brushed aluminum.
- Insulated glass window for walk-in cooler applications
- Brushed aluminum frame, 4" (102 mm) deep for standard walk-in panels
- Lets staff check inside the walk-in without opening the door
- Direct OEM replacement, part # W91-14243-UGUF
The window is built into the door at our shop. It is added to your cart with the door.
An add-on could not be added to your cart. Your door is in the cart without it. Call 313-528-7888 and we will add it to your order.
Standard lead time is an estimate. Production time does not include shipping. An upgrade is added to your cart with the door. Faster production slots are limited.
That faster production option just filled up, so the upgrade was not added. Your door is in the cart with standard production. Call 313-528-7888 if you need it sooner.
Cut sheets for the 45" x 82" door
Dimensioned drawings for this door size: elevation, section and floor plan, with the rough opening and exterior frame sizes. Hinge side is taken standing outside the walk-in, facing the door.
Jamb frame (new construction) and plug frame (finished opening)
Right hinge cut sheet (PDF) Left hinge cut sheet (PDF)
1 1/2" and 2" jamb frames, for replacing a flush door
Right hinge, 1 1/2" and 2" jamb (PDF) Left hinge, 1 1/2" and 2" jamb (PDF)
Confirm all dimensions with us before preparing the opening: 313-528-7888.
How-to videos
Width, height, diagonals and wall thickness, so you order the right size.
Plug, jamb and picture frames, and when to use each.
How to tell which hinge side to order.
An overview of the main steps. Always follow the instructions shipped with your door.
Questions? Call 313-528-7888 or email sales@eltcustomcoolers.com.