Stainless Steel Sliding Doors

Freezer sliding doors are rated for standard freezer duty at -10°F, with a heated jamb required for low-temperature applications between -20°F and -40°F to prevent frost buildup. Cooler sliding doors don't require heated jambs since they operate at higher temperatures with less frost risk.

A heated jamb is strongly recommended for high-cycle freezer doorways where frequent forklift or pallet-jack pass-through causes frost and ice accumulation at the jamb. It's required for low-temperature duty between -20°F and -40°F and is available on select 60"-96" freezer configurations.

Yes, these prehung sliding doors are drop-in replacements compatible with any brand of walk-in unit, including Kolpak, Amerikooler, Master-Bilt, Nor-Lake, US Cooler, Bally, Polar King, and legacy custom cold-room installations, retrofitting directly over existing wall panels and openings.

Installation of a prehung sliding door with jamb sandwich frame, header, track, and trolley system typically takes 2-4 hours, which is longer than a standard swing door due to the additional hardware. Nationwide installer network referrals are available if you need a local contractor.

Yes, the 12'x12' walk-in cooler configuration is available with an electric power sliding option, providing hands-free open and close operation ideal for high-cycle, automated cold-storage doorways where manual door handling would slow throughput.

ELT Custom Coolers offers Affirm financing with interest-free installments on many products, plus MyCloudFunding equipment financing for larger orders, allowing facilities to spread out the cost of new sliding door systems while maintaining cash flow.